3.2TL TYPE S V6-3.2L SOHC (2002)
42. Disconnect the SRS unit connector C (8P) from the SRS unit.
43. Connect the Honda PGM Tester (A) to the Data Link Connector (16 P) (B), and follow the Tester's prompts in the "SCS" menu (See the Tester's
operating manual).
44. Check resistance between the No. 6 terminal of SRS unit connector C (8P) and body ground. There should be 0 - 1.0 Ohm.
Is the resistance as specified?
YES - Faulty SRS unit or poor contact at SRS unit connector C (8P); check the connection. If the connection is OK, replace the SRS unit.
NO - Open in the SCS line between the No. 6 terminal of SRS unit connector C (8P) and the No. 9 terminal (BRN wire) of the Data Link
Connector (DLC) (16P), or open between the No. 4 terminal of the Data Link Connector (DLC) (16P) and body ground. Repair the open wire(s).
