3.2TL TYPE S V6-3.2L SOHC (2002)
39. Check resistance between the No. 5 terminal of SRS unit connector C (8P) and body ground. There should be 1 MOhm or more.
Is the resistance as specified?
YES - Faulty SRS indicator circuit in the gauge assembly; replace the gauge assembly.
NO - Short to ground in dashboard wire harness A; replace dashboard wire harness A.
40. Disconnect gauge assembly connector C (18P) from the gauge assembly.
41. Check resistance between the No. 17 terminal of the gauge assembly connector C (18P) and the No. 5 terminal of SRS unit connector C (8P).
There should be 1 Ohm or less.
Is the resistance as specified?
YES - Faulty SRS indicator circuit in the gauge assembly or poor contact at gauge assembly connector C (18P); Check the connection. If the
connection is OK, replace the gauge assembly.
NO - Open in dashboard wire harness A; replace the dashboard wire harness A.