3.2TL TYPE S V6-3.2L SOHC (2002)
31. Connect the No. 4 terminal of SRS unit connector B (18P) and the No. 5 terminal of SRS unit connector C (8P) with a jumper wire.
32. Turn the ignition switch ON (II).
33. Check the SRS indicator.
Did the SRS indicator go off?
YES - Faulty SRS unit; replace the SRS unit.
NO - Go to step 34.
34. Turn the ignition switch OFF.
35. Disconnect the jumper wire between the No. 4 terminal of SRS unit connector B (18P) and the No. 5 terminal of SRS unit connector C (8P).
36. Check the No. 2 (10 A) fuse in the driver's under-dash fuse/relay box.
Is the fuse OK?
YES - Go to step 40.
NO - Go to step 37.
37. Replace the No. 2 (10 A) fuse in the driver's under-dash fuse/relay box.
38. Disconnect gauge assembly connector C (18P) from the gauge assembly.