3.2TL TYPE S V6-3.2L SOHC (2002)
YES - Faulty SRS indicator circuit in the gauge assembly; replace the gauge assembly.
NO - Go to step 5.
5. Turn the ignition switch OFF.
6. Disconnect the SRS unit connector C (8P) from the SRS unit.
7. Connect a voltmeter between the No. 17 terminal (+) of gauge assembly connector C (18P) and body ground. Turn the ignition switch ON (II), and
measure the voltage. There should be 0.5 V or less.
Is the voltage as specified?
YES - Faulty SRS unit; replace the SRS unit.
NO - Short to power in the BLU wire of dashboard wire harness A; replace dashboard wire harness A.
8. Turn the ignition switch OFF. Check the No. 9 (7.5 A) fuse in the driver's under-dash fuse/relay box.
Is the fuse blow?
YES - Go to step 10.
NO - Go to step 9.
9. Connect a voltmeter between the No. 7 terminal (+) of gauge assembly connector A (14P) and body ground. Turn the ignition switch ON (II), and
measure the voltage. There should be battery voltage.