acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

SRS Indicator Stays On After the Ignition Switch is Turned ON|Page 10548 > < SRS Indicator Stays On After the Ignition Switch is Turned ON|Page 10546
Page 3
background image

Is there battery voltage?

YES - Faulty SRS indicator circuit in the gauge assembly or poor contact at the gauge assembly connector A (14P) and gauge assembly; if the
connection is OK, replace the gauge assembly.

NO - Open in the driver's under-dash fuse/relay box No. 10 (7.5 A) fuse line or open in the YEL wire of dashboard wire harness A. If the driver's
under-dash fuse/relay box is OK, replace dashboard wire harness A.

10. Replace the No. 9 (7.5 A) fuse, and check to see if the SRS indicator comes on.

Do the indicators come on?

YES - The system is OK at this time.

NO - Repair the short to ground in the driver's under-dash fuse/relay box No. 9 (7.5 A) fuse circuit.

SRS Indicator Stays On After the Ignition Switch is Turned ON|Page 10548 > < SRS Indicator Stays On After the Ignition Switch is Turned ON|Page 10546