3.2TL TYPE S V6-3.2L SOHC (2002)
16. Connect the A/T shift cable (C) to the transmission.
17. Install the exhaust pipe A(B) and mounting bracket B(C).
18. Install the front wheels.
19. Fill the system with power steering fluid, and bleed air from the system.
20. After installation, perform the following checks.
-
Start the engine, allow it to idle, and turn the steering wheel from lock-to-lock several times to warm up the fluid. Check the gearbox for leaks.
-
Adjust the front toe.
-
Check the steering wheel spoke angle. Adjust by turning the right and left tie-rods equally, if necessary.
