3.2TL TYPE S V6-3.2L SOHC (2002)
Control Arm: Service and Repair
Upper Arm
Replacement
Special Tools Required
Ball joint remover, 28 mm 07MAC-SL00200
1. Raise the front of the vehicle, and make sure it is securely supported. Remove the front wheel.
2. Remove the front damper.
3. Remove the wheel sensor bracket nut (A) from the upper arm (B).
4. Remove the cotter pin from the upper ball joint castle nut, and remove the nut.
5. Remove the upper ball joint from the knuckle using the special tool.