3.2TL TYPE S V6-3.2L SOHC (2002)
Control Arm: Service and Repair
Upper Arm
Replacement
Special Tools Required
Ball joint remover, 28 mm 07MAC-SL00200
1. Remove the cotter pin from the upper ball joint castle nut, and remove the nut.
2. Raise the rear of the vehicle, and make sure it is securely supported. Remove the rear wheel.
3. Remove the upper ball joint from the knuckle using the special tool.
4. Remove the brake hose mounting bolts (A).
5. Remove the wheel sensor mounting bolt (B).
6. Remove the upper arm bolt (A). Remove the upper arm (B) from the vehicle.
7. Install the upper arm in the reverse order of removal, and note these items:
