3.2TL TYPE S V6-3.2L SOHC (2002)
-
Center punch around the spot weld imprints on the front side frame, lower dashboard, and dashboard upper side member.
-
Drill holes using a spot cutter.
-
Using a chisel, pry off the weld flange.
-
From the passenger compartment side, drill holes in the spot welded area with a 5 mm (0.2 in.) spot weld cutter.
NOTE: Drill holes completely through the parts since the replacement damper housing will be welded by MIG welding.
7. Straighten the related parts.
