CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
9.
Pull the slide adjuster lever (under the front of the seat), and slide the inner and outer seat tracks until they align. (This will help you to install the
seat.) Then carefully place the seat in the car without scratching the door sill molding.
10.
Reinstall the seat mounting bolts, and tighten them to 34 N.m (25 lb-ft).
11.
Make sure the rear seat access feature works correctly.
^
When you pull up on the seat-back release lever, the seat-back should pivot forward, arid the seat should move forward in its tracks.
^
When you return the seat-back to its upright position, it should lock in place, and the entire seat should slide back and lock in place.
12.
Reattach the seat track end covers.
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Technical Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
Operation number:
852302
Flat rate time:
0.4 hour
Failed part:
P/N 81165-SV2-A01
Defect code:
030
Contention code:
B99
Template ID:
96-026A