CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
15. Remove the stiffener plate first, then remove the right mounting brackets.
16. Pull the steering gearbox all the way down to clear the pinion shaft from the bulkhead.
17. Move the steering gearbox to the right so the left rack end clears the rear beam.
18. Hold the steering gearbox and slide the rack all the way to the led, then place the led rack end below the rear beam.
19. Move the steering gearbox to the led, and tilt the led side down to remove it from the vehicle.
CAUTION: Be careful not to bend or damage the two power steering lines and cylinder lines when removing and installing the gearbox.
INSTALLATION
1. Before installing the gearbox, slide the rack all the way to right.
2. Install the pinion shaft grommet.
NOTE: Align the slot in the pinion shaft grommet with the lug portion on the valve housing.
3. Pass the right side of the steering gearbox above and through the right side of the rear beam.
