CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
4. Raise the led side of the steering gearbox above and through the led side of the rear beam.
5. Install the pinion shaft grommet, then insert the pinion shaft up through the bulkhead.
6. Install the right mounting bracket over the mounting cushion, then loosely install two gearbox mounting bolts.
7. Tighten the four mounting bolts on the stiffener plate first, then tighten the two mounting bolts on the right mounting brackets.
NOTE: After installing the steering gearbox, make sure that there is no interference between the cylinder lines and rear beam.
8. Center the steering rack within its stroke.
9. Connect the fluid lines to the valve body unit.
NOTE: After connecting the fluid lines, make sure that there is no interference between the lines and other parts.
