CL TYPE S V6-3.2L SOHC (2001)
-1 Thoroughly sand the body filler surface.
Use the double action sander and #80~#120 disc paper.
-2 Sand the surface evenly, particularly the area that was filled.
Use a flexible block and #120#180 sandpaper
-3 Featheredge the paint coat.
Sand the body filler surface until the proper dimensions are met.
Use the double action sander and #240-#320 #400 disc paper.
3. Air blowing / decreasing
Use alcohol, and wax and grease remover.
Also, clean and degrease the surfaces where masking tape will be attached.