CL TYPE S V6-3.2L SOHC (2001)
53. Wrap vinyl tape (A) around the rack teeth and rack end edges, then coat the surface of the tape with power steering fluid. Make sure that the vinyl
tape is wrapped carefully so there is no stepped portion.
54. Coat the inside surface of the new cylinder end seal (A) with power steering fluid, then install it onto the steering rack with its grooved side toward
the piston. When installing the cylinder end seal, be careful not damage the lip of the seal with the edges or teeth of the steering rack.
55. Remove the vinyl tape from the steering rack, then remove any adhesive residue.
56. Install the new backup ring (A) on the steering rack, then place the cylinder end seal (B) against the piston.