CL TYPE S V6-3.2L SOHC (2001)
57. Grease the steering rack teeth, then insert the steering rack into the gear box housing. Be careful not to damage to inner surface of the cylinder wall
with the rack edges.
58. Insert an appropriate size deep socket wrench (A) onto the steering rack as shown.
59. Install the cylinder end seal (B) into the bottom of the cylinder by pressing on the tool with a press. Do not push on the tool with excessive force as
it may damage the cylinder end seal.
60. Remove the tool, and center the steering rack.
61. Wrap vinyl tape around the rack end edges, and coat the surface of the tape with the power steering fluid. Make sure that the vinyl tape is wrapped
carefully so there is no stepped portion
