Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
55. Install the O-ring on the rack guide screw.
56. Coat the rack guide sliding surface with grease.
57. Install the rack guide, spring and rack guide screw on the gear housing.
58. Tighten the rack guide screw until it compresses the spring and seats against the rack guide then loosen it.
59. Retighten it to 4 Nm (0.4kg-m, 2.9 lb-ft), back off about 20+ 5 ° /0 and install the locknut on the rack guide screw.
60. Tighten the locknut while holding the rack guide screw with the special tool.
61. Coat the 9.8 x 1.9 mm O-rings with power steering fluid, and install them together with the orifices.
62. Apply vinyl tape to the pinion shaft, and coat the vinyl tape with grease.
63. Coat the 53.5 x 2 mm O-ring and pinion holder pin with grease, and install the valve body unit.