Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
64. Install the valve body unit on the gear housing with the two 8 mm bolts.
65. Remove the vinyl tape and install the pinion dust cover.
CAUTION:
-
When installing, be careful not to hit the pinion holder pin.
-
Make sure the O-rings are in place and not pinched.
66. Install the new lock washer in the groove in the steering rack.
67. Hold the steering rack with a wrench and tighten the rack end to 80 Nm (8.0 kg-m, 58 lb-ft).
68. After tighting the rack end, stake the two sections of the lock washer.
