MDX V6-3.7L (2007)
6. Disconnect the power window switch connector (A) and courtesy light connector (B), detach the harness clips (C), then remove the door panel
(D).
7. Remove the latch cable fastener (A) from the inner handle (B), and then disconnect the latch cable (C) from the cable fastener (D). Disconnect the
inner handle cable (E) from the cable fastener (F), then remove the inner handle.
NOTE: Check if the cable fasteners are damaged or stress-whitened.
8. Remove the screws and release the hooks (A), then remove the wood trim (B), the door grip (C), armrest cover (D) and the armrest assembly (E)
from the door panel (F).
