MDX V6-3.7L (2007)
9. Remove the screws (A, B) and release the pins (C), then separate the armrest (D), the power window switch panel (E), and the power window
switch (F).
10. Install the door panel in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Replace any damaged cable fasteners with new ones.
-
The latch cable (A) should be fixed to the cable fastener (B) with the latch in the unlocked position as shown.
-
Make sure the connectors are plugged in properly, and the cables are connected securely.
-
Make sure the window and power door lock operate properly.