MDX V6-3.7L (2007)
7. If the side curtain airbag has not been deployed, check the A-pillar trim (A) and note the following:
-
To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the A-pillar trim and replace it if it has any
of these types of damage:
-
Any cracks, deformations, or stress-whitened areas in the A-pillar trim
-
Any cracks or stress-whitening in the clip and pin seating surfaces (B)
-
Damaged guide bracket (C)
-
Replace the upper grommet with a new one because it will be damaged during removal.
-
Check if the clips (D) are damaged or stress-whitened, and if replace, replace them with new ones.
8. Before installing the A-pillar trim (A), carefully remove the grommet (B) from the pin (C) on the upper clip.
9. Check the overlap between the headliner and A-pillar trim, and if necessary, adjust it.
10. Carefully reinstall the grommet (A) on the pin (B) and seat them on the A-pillar trim (C) as shown.