MDX V6-3.7L (2007)
4. Inside the fender, disconnect the rear washer hose at the T-fitting, and plug both ends of the hose.
5. Push the end of the rear washer hose and its grommet into the passenger compartment.
NOTE:
The rear washer hose is attached to the main wire bundle of the floor wire harness. New floor wire harnesses come with the washer hose already
attached.
6. Remove both rear fender covers, then disconnect the rear TPMS initiator connectors and the rear damper connectors (if equipped). Push the wire
harness grommet, the wire harness, and the connectors into the passenger compartment.
