MDX V6-3.7L (2007)
NOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the left second row seat.
2. From under the seat cushion, release the hooks of the back cover carpet from the seat cushion frame, then pull the carpet back.
3. With seat heater: Disconnect the seat cushion heater connector, and remove the wire ties.
4. Remove these items:
-
Recline outer cover.
-
ISO fix bracket outer cover.
5. Remove the seat cushion from the left second row seat.
6. Remove the center anchor bolt (A), and remove the seat belt buckle (B).
7. Install the buckle in the reverse order of removal, and note these items:
-
Apply medium strength type liquid thread lock to the anchor bolt before reinstallation.
-
Assemble the washers, collar and bushing on the center anchor bolt as shown.
Right Seat Belt Buckle
NOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the right second row seat.
2. Remove these items:
-
Recline outer cover.
-
Center outer cover.
