MDX V6-3.7L (2007)
14. Remove the 6.0 mm (0.24 in.) pin that was installed to hold the shift lever.
15. Turn the ignition switch ON (II). Move the shift lever to each position, and verify that the A/T gear position indicator follows the transmission
range switch.
16. Shift to the P position, and check that the shift lock works properly. Push the shift lock release, and verify that the shift lever releases, and also
check that the shift lever locks when it is shifted back to the P position.
17. Install the beverage holder inner case.
18. Install the passenger's center console trim.