MDX V6-3.7L (2007)
-
Keep water, dust, and abrasive materials away from the primed surface.
16. With a sponge, carefully apply a light coat of body primer to any exposed paint around the flange where new adhesive will be applied. Let the
body primer dry for at least 10 minutes:
-
Do not apply body primer to any remaining original adhesive on the flange.
-
Be careful not to mix up glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
17. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.