MDX V6-3.7L (2007)
NOTE: Do not open or close the doors for an hour until the adhesive is dry.
18. Scrape or wipe the excess adhesive off with a putty knife or towel. To remove adhesive from a painted surface or the quarter glass, wipe with a
soft shop towel dampened with isopropyl alcohol.
19. After the adhesive has dried, spray water over the quarter glass and check for leaks. Mark the leaking areas, and let the quarter glass dry, then seal
with sealant. Let the vehicle stand for at least 4 hours after quarter glass installation. If the vehicle has to be used within the first 4 hours, it must
be driven slowly.
20. Reinstall all remaining removed parts.
NOTE: Advise the customer not to do the following things for 2 to 3 days:
-
Slam the doors with all the windows rolled up.
-
Twist the body excessively (such as when going in and out of driveways at an angle or driving over rough,uneven roads).
