MDX V6-3471cc 3.5L (2002)
12. Reconnect the connector to the door multiplex control unit, make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 13.
13. If all the input tests prove OK, one of the control units must be faulty, Substitute a known-good control unit for the on that is most likely at fault,
then recheck the system. If the system works properly, the original control unit is faulty; replace it. If there is still a malfunction, substitute a
known-good control unit for the next most likely unit to be at fault, and recheck. If the system works properly, the original unit is faulty; replace it.