MDX V6-3471cc 3.5L (2002)
1. Loosely install the damper (A) onto the frame, then loosely install the three flange nuts (B).
2. Install the damper onto the knuckle.
-
1 Loosely install the damper pinch bolts (A) and flange nuts (B) to the damper (C).
-
2 Install the wheel sensor harness (D) to the damper.
-
3 Install the brake hose bracket (E) to the damper.
-
4 Loosely install the stabilizer link (F) to the damper.
3. Raise the front suspension with a floor jack to load the vehicle weight.
4. Tighten the damper pinch bolts and flange nuts to the specified torque.
5. Tighten the flange nuts on top of the damper to the specified torque.
6. Install the service caps.
7. Install the front wheels.
8. Check the front wheel alignment, and adjust it if necessary.
