NSX-T V6-3.0L DOHC (VTEC) (1998)
3. Install new rings in the proper sequence and position.
NOTE: Do not reuse old piston rings.
RING TO GROOVE CLEARANCE
After installing a new set of rings, measure ring-to-groove clearances:
Top Ring Clearance
M/T:
Standard (New): 0.035 - 0.065 mm (0.0014 - 0.0026 inch)
Service Limit: 0.13 mm (0.005 inch)
A/T:
Standard (New): 0.030 - 0.055 mm (0.0012 - 0.0022 inch)
Service Limit: 0.13 mm (0.005 inch)
Second Ring Clearance
M/T:
Standard (New): 0.030 - 0.060 mm (0.0012 - 0.0024 inch)
Service Limit: 0.13 mm t0.005 inch)
A/T:
Standard (New): 0.030 - 0.055 mm (0.0012 - 0.0022 inch)
Service Limit: 0.13 mm (0.005 inch)
ALIGNMENT
1. Install the rings as shown.