NSX-T V6-3.2L DOHC (VTEC) (1997)
4. Remove the two brake hose mounting bolts. Remove the two caliper mounting bolts, and the caliper from the bracket.
CAUTION:
-
Thoroughly clean the outside of the caliper to prevent dust and dirt from entering inside.
-
Support the caliper with a piece of wire so that it does not hang from the brake hose.
5. Remove the pad shims, pads and pad retainers.
6. Using vernier calipers, measure the thickness of each brake pad lining.
Brake Pad Thickness:
Standard: 9.5 mm (0.37 inch) max.
Service Limit: 1.6 mm (0.06 inch)
NOTE:
-
Measurement does not include pad backing thickness.