NSX V6-3.2L DOHC (2001)
Driver's Airbag
1. Place the driver's airbag assembly in the steering wheel, and secure it with new Torx bolts.
Driver's Airbag
2. Reconnect the driver's airbag 3P connector to the cable reel 3P connector. Attach the short connector to the access panel, then reinstall the panel
on the steering wheel.
3. Remove the short connectors from the seat belt tensioners, then attach them to their holders.
Airbag Assembly Installation
4. Reconnect the floor wire harness 3P connector to the seat belt tensioner.