RDX L4-2.3L Turbo (2008)
8. Install the headliner in the reverse order of removal, and note these items:
-
If the side curtain airbag has deployed, replace the headliner and removed trim pieces with new ones.
-
To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect removed pieces and replace them if they
have any of these types of damage:
-
Any crease or tears in the headliner (A)
-
Any cracks or breakages in the grab handle (B)
-
Any damages around the grab handle holes (C) or sunvisor holes in the headliner
-
Any cracks in the sunvisor stay base (D)
-
Any bends or cracks in the sunvisor stay shaft (E)
-
Any cracks in the sunvisor base (F)
-
Any cracks or breakages in the vanity mirror base (G)
-
Any Velcro fasteners (H) and clip bases (I) which have come off the headliner
-
When installing the grab handle, push on the handle against the bracket (J) until the clips (K) snap into place securely.
-
Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
-
Check that both sides of the headliner are securely attached to the trim.
-
Make sure the headliner overlaps the trim pieces correctly.
-
When reinstalling the headliner through the tailgate opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
-
Reconnect the negative cable to the battery.
-
Set the clock.
-
Enter the anti-theft code for the audio and the navigation system (if equipped), then enter the audio presets.
-
Check for any DTCs that may have been set during repairs, and clear them.