RDX L4-2.3L Turbo (2008)
12. Remove the seat-back cover/pad (A) from the seat-back frame (B).
13. Pull back the edge of the seat-back cover all the way around, and release the clips (A), then remove the seat-back cover.
14. Install the cover in the reverse order of removal, and note these items:
-
Reinitialize the ODS unit.
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips, hooks,
and hook strips.
-
Replace any clips you removed with new ones (A).
-
Make sure the side airbag harness and ODS subharness (passenger's seat) are routed properly.
