RDX L4-2.3L Turbo (2008)
3. Driver's seat: Remove the recline cover (A).
1. Remove the screw and detach the hooks (B).
2. Pull up the cover, then detach the hooks (C).
3. Disconnect the recline switch and up-down switch connector (D), lumbar support switch connector (E).
4. Passenger's seat: Remove the recline cover (A).
1. Remove the recline knob (B) and screw (C).
2. Gently pull out the cover, then detach the clip (D), and release the hooks (E), and remove it towards the back.