RDX L4-2.3L Turbo (2008)
Seat Cover: Service and Repair
Rear Seat-Back Cover/Pad
Rear Seat-back Cover/Pad Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to tear the seams or damage the seat covers.
1. Remove the rear seat.
2. Remove the rear seat armrest.
3. Remove the pivot bracket (A).
1. Using a T40 TORX bit, remove the pivot bolt (B).
2. Remove the pivot cover (C) and pivot bracket. If necessary, remove the bushing (D) and pivot washer (E).
4. Install the bracket in the reverse order of removal, and note these items:
-
Apply multipurpose grease to the moving portions of the bushing.
-
Replace any damage or stress-whitened bushing and pivot washer with new one.
5. Remove the clips (A), and detach the clips (B), then remove the striker hole cover (C).