RDX L4-2.3L Turbo (2008)
Seat Cover: Service and Repair
Rear Seat Side Bolster Cover
Rear Seat Side Bolster Cover Replacement
NOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the side seat bolster.
2. Remove the screws (A).
3. Pull out the seat belt guide (B) to detach the clip (C), and remove the rear back side plate (D).
4. Release the all the hook strips (A), and fold back the seat side bolster cover (B), and release the cover from the hooks (C).
5. Install the cover in the reverse order of removal. To prevent wrinkles when installing a side bolster cover, make sure the material is stretched
evenly over the pad before securing the hook strips and staples.