RDX L4-2.3L Turbo (2008)
8. Remove the master cylinder mounting nuts (C).
9. Remove the brake booster pressure sensor (D) with the stay, and move it aside. Do not damage the sensor and the wire harness.
10. Remove the master cylinder from the brake booster (E). Be careful not to bend or damage the brake lines when removing the master cylinder.
11. Remove the O-ring (F) from the master cylinder.
NOTE: Replace the O-ring whenever the master cylinder is removed.
12. Install the master cylinder in the reverse order of removal, and note these items:
-
Check the brake booster pushrod clearance.
-
Coat the new O-ring with silicone oil (Shin-Etsu KF54).
-
Check the brake pedal height and free play after installing the master cylinder, and adjust it if necessary.
13. Bleed the brake system.
14. Spin the wheels to check for brake drag.
