RDX L4-2.3L Turbo (2008)
Information Bus: Component Tests and General Diagnostics
MICU Input Test
MICU Input Test
1. Before troubleshooting the multiplex integrated control system, refer to B-CAN System Diagnosis Test Mode A.
2. Check the No. 10 (7.5 A) fuse in the under-dash fuse/relay box. If any fuse is blown, replace it and go to step 3.
3. Disconnect under-dash fuse/relay box connectors E, F, G, K, and T.
NOTE: All connector views are shown from wire side of female terminals.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.