RDX L4-2.3L Turbo (2008)
-
If the terminals look OK, go to step 5.
5. With the connector still disconnected, make these input tests at the appropriate connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
6. Reconnect the connectors to the under-dash fuse/relay box, and make these input tests at the connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the MICU must be faulty; replace the under-dash fuse/relay box.
