RDX L4-2.3L Turbo (2008)
Installation
NOTE:
-
Installation of the side curtain airbag must be done according to the precautions and procedures section.
-
If the airbag is frayed, or has any other visible damage, replace it. Do not attempt to repair an airbag.
-
When you install the airbag, make sure it is not twisted, and that it is not caught between the inflator bracket by the bracket bolts.
-
Make sure that the side curtain airbag inflator retainer is installed properly. Otherwise the airbag could incorrectly deploy and cause damage or
injuries.
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
1. Place the new side curtain airbag assembly on the side of the roof. Tighten the side curtain airbag mounting bolts (A).