RDX L4-2.3L Turbo (2008)
2. Compress the damper spring.
3. Install all parts, except the damper mounting washer and self-locking nut, onto the damper unit (A). Refer to the Exploded View.
4. Align the bottom of the damper spring (A) with the stepped part (B) of the lower spring seat.
5. Align the damper bracket (A) and the damper mounting base (B) so the stamp (C) points toward outside.
6. Align the angle of the stud bolt (D) on the damper bracket as shown.
7. Install a new self-locking nut (A).
