RDX L4-2.3L Turbo (2008)
Differential Case: Service and Repair
Side Case Replacement
Side Case Replacement
1. Remove the rear differential.
2. Remove the rear differential front mounting brackets (A) from the rear differential (B).
3. Remove the differential fluid temperature sensor cover (A), differential fluid temperature sensor (B), O-ring (C), and rear differential harness
bracket (D).
4. Remove the rear differential left side case (A) or the rear differential right side case (B), the 10 x 12 mm dowel pins (C) from the rear differential
center case (D).
5. Replace the rear differential left side case or the differential right side case.
6. Remove the ring gear (A), needle bearing (B), and the 60.2 mm shim (C) from the differential side case (D).