RDX AWD L4-2.3L Turbo (2010)
License Plate Frame: Service and Repair
Rear License Trim Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim or the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the maintenance lid (A) by prying the hooks (B) and pulling it out.
2. Remove the right inner taillight See: Lighting and Horns/Tail Lamp/Service and Repair.
3. Disconnect the rearview camera connector (A). Detach the connector clip, then remove the connector clip (B) from the rearview camera connector
(C).
4. From inside the tailgate, push out and remove the clips (A).