RDX AWD L4-2.3L Turbo (2010)
4. Remove these items:
-
Front seat belt lower anchor See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Belt Replacement
-
Front door opening seal, as needed See: Scuff Plate/Service and Repair
-
Rear door opening seal, as needed See: Scuff Plate/Service and Repair
5. Pull the bottom of the B-pillar upper trim (A) back by hand to detach the lower hooks (B). Release the upper pin (C) by pulling the top of the
B-pillar upper trim.
6. Pull the trim down to release the upper hooks (D).
7. Pass the front seat belt (A) lower anchor out through a hole in the slider (B), then remove the B-pillar upper trim (C).