RDX AWD L4-2.3L Turbo (2010)
4. Remove the cargo area side trim panel (A).
1. Pry out the cover (B) with the appropriate trim tool from the cargo area side trim panel, then remove the bolts (C) of the rear side hanger (D).
2. Remove the clips (E), then pull back the trim panel by hand to detach the clips (F).
3. Pull out the upper edge of the panel to release the upper hook (G) from the quarter pillar trim (H).
4. Pull out the rear seat belt through the slit in the seat belt retractor cover, then remove the cargo area side trim panel.
5. Driver's side: Disconnect the cargo area light connector (I).