RDX AWD L4-2.3L Turbo (2010)
4. Reconnect the dashboard wire harness 4P connector (B) to the front passenger's airbag connector.
5. Reinstall the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation.
6. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
7. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
8. After installing the front passenger's airbag, confirm proper system operation: Turn the ignition switch to ON (II), and check that the SRS indicator
comes on for about 6 seconds and then go off.