RDX AWD L4-2.3L Turbo (2010)
Air Bag: Removal and Replacement
Side Airbag Replacement
Side Airbag Replacement
NOTE: If replacing the side airbag after deployment, refer to Component Replacement/ Inspection After Deployment See: Service and Repair for a
complete list of other parts that must also be replaced.
Removal
1. Do the battery terminal disconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures, then wait for 3 minutes
before starting work.
2. Disconnect the side airbag inflator 2P connector (A).
3. Remove the front seat See: Body and Frame/Seats/Service and Repair/Front Seat Removal/Installation and seat-back cover See: Body and
Frame/Seats/Seat Cover/Service and Repair/Front Seat-back Cover/Pad Replacement.
4. Remove the mounting nut (A), then remove the side airbag (B).
Installation
NOTE: