RDX AWD L4-2.3L Turbo (2010)
5. Remove the hook (C) from the protector.
Installation
NOTE:
-
If replacing the side curtain airbag after deployment, refer to Component Replacement/ Inspection After Deployment See: Service and Repair for
a complete list of other parts that must also be replaced.
-
Installation of the side curtain airbag must be done according to the precautions and procedures See: Air Bag(s) Arming and Disarming/Service
and Repair.
-
If the airbag is frayed, or has any other visible damage, replace it. Do not attempt to repair an airbag.
-
When you install the airbag, make sure it is not twisted, and that it is not caught between the inflator bracket by the bracket bolts.
-
Make sure that the side curtain airbag inflator retainer is installed properly. Otherwise the airbag could incorrectly deploy and cause damage or
injuries.
-
If there is any damage to the side curtain airbag, do not try to repair it. Replace any damaged side curtain airbag.
1. Place the new side curtain airbag assembly on the side of the roof. Tighten the side curtain airbag mounting bolts (A).
