RDX AWD L4-2.3L Turbo (2010)
2. Connect the SRS wire harness 2P connector (A) to the side curtain airbag.
3. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
4. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
5. After installing the side curtain airbag, confirm proper system operation: Turn the ignition switch to ON (II), and check that the SRS indicator
comes on for about 6 seconds and then go off.