RDX AWD L4-2.3L Turbo (2010)
6. Install the rear seat belt and retractor in the reverse order of removal, and note these items:
-
Apply medium strength liquid thread lock to the anchor bolts before reinstallation.
-
Check that the retractor locking mechanism functions as described See: Testing and Inspection.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the rear seat belt.
Center Seat Belt and Seat Belt Buckle
1. Pull up on the front of the rear seat cushion, then tilt the rear seat cushion forward. Pull back the carpet as needed.
2. Remove the center anchor bolts (A), then remove the right seat belt buckle (B), center seat belt buckle (C), and left seat belt buckle (D).
3. Remove the left seat-back See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation.
4. Remove the rear seat-back cover See: Body and Frame/Seats/Seat Cover/Service and Repair/Rear Seat-Back Cover/Pad Replacement.
5. Remove the screws, then remove the lid (A) on the seat back frame.
