RDX AWD L4-2.3L Turbo (2010)
Seat Belt: Service and Repair
Rear Seat Belt Replacement
Rear Seat Belt Replacement
NOTE: Check the second row seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
Rear Seat Belt
1. Pull on the front of the seat cushion, then tilt the seat cushion forward.
2. Remove the rear door sill trim See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair.
3. Pull the carpet back, and remove the lower anchor bolt (A).
4. Remove these items:
-
Rear seat-back, fold down See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation
-
Rear seat side bolsters, both sides See: Body and Frame/Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Link End Mounting
Bracket Replacement
-
Cargo area side trim panel, both sides See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim
Removal/Installation - Rear Side Area
5. Remove the front retractor bolt (A) and rear retractor bolt (B), then remove the rear seat belt (C) and retractor (D).